Heavy Duty Aluminium Hockey Goal

The preferred choice of England Hockey and for all matches at the Manchester Commonwealth Games. An excellent option specifically suited to both water and sand based synthetic surfaces. The goals can be easily moved using our cellular rubber wheel kit preventing damage to the surface.
All hockey goals must be anchored correctly to conform to BS EN 750. On synthetic surfaces, suitable provision for anchorage must be made. This can be achieved by installing a ground anchor below the synthetic grass level or by attaching the goal to the nearest perimeter fixing point. If freestanding weights are the only option then 10 x ANC-005 Counterbalance weights are required per goal. See below for anchoring options.
Heavy Duty Aluminium Hockey Goal
Regulation size 3.66m wide x 2.13m high with a 1.22m runback
Manufactured from 50.8mm x 65mm x 2.5mm thick reinforced aluminium
Uprights, crossbar and side frames all polyester powder coated white
Zinc plated corner joints made from 8mm thick steel plate
Back supports and top backbar manufactured from 32mm diameter x 2.6mm thick aluminium
460mm high backboards made from reinforced aluminium panels with green needlefelt carpet on all inside faces
Side frames complete with fully welded back tubes and lifting handles for added strength
Stainless steel bolts throughout
Uprights and crossbars feature stainless steel retaining rods to ensure net is held firmly in position

Recommended net HOC-003
190.00 kg per set

Specifications for Cellular Rubber Wheel Kit:-
Cellular rubber puncture proof wheels for aluminium goals
Supplied as a set of 4
16.00 kg per set

Specifications for Net:-
3mm thick green polyethylene net
3.7m x 2.1m x 1.2m
7.60 kg per pair